Custom Industrial & OEM Solutions
Rugged labels & interface components built for the line
Small component failures can create expensive problems. A peeling label, failed adhesive or misaligned panel can slow assembly, trigger rework or create problems in the field.
iD Products helps you get those details right before they become bigger issues. As a single-source partner for industrial labels, graphic overlays, machined panels and die-cut sealing solutions, we help complete the final layer of your assembly with components engineered for fit, durability and performance.
Get expert guidance, technical support and reliable production that help keep your project moving and get your product to market faster.
Note: Specific compliance requirements vary by material and application
Preventing problems before they start
At iD Products, we know that uptime, safety and total cost of ownership are just some of the things at stake.
We help anticipate failure at the design stage to prevent issues from stopping the line.
Faded & peeling labels
Exposure to UV, cleaning chemicals, heat and other environmental stresses.
Cracked overlays
Early failure from heavy use, machine vibration, repeated impact and harsh operating conditions.
Adhesive failure
Lifting and separation of panels, overlays and other components due to improper adhesive selection, substrate incompatibility or environmental exposure.
Ill-fitting panels
Misaligned cutouts, excess clearance and other dimensional variations in machined panels and enclosures.How we help: Our core competencies for industrial settings
From labeling to interfaces to assemblies, our solutions complete the final layer of your industrial or OEM application.
Graphic Overlays
Rugged, protective interfaces that resist grease, solvents, abrasion and heavy use.
Key uses:
- Control panels
- Operator interfaces
Custom Gaskets, Insulators and Shields
Block leaks, absorb vibration, provide electrical isolation and protect sensitive assemblies.
Key uses:
- Electronic enclosures
- Heavy equipment housings
- Control boxes
Heavy-Duty Labels
Durable identification, safety and warning labels designed to remain readable and attached.
Key uses:
- GHS-compliant labels
- ANSI warning labels
- Outdoor equipment labels
Industrial Bonding & Mounting
Speed assembly and create lasting bonds with pressure-sensitive adhesive solutions.
Key uses:
- Display mounting
- Panel bonding
- Component assembly
Rugged components for demanding workflows
Industrial equipment faces wear, harsh conditions and demanding production environments. Here’s how our components are engineered for the job.
High-tack adhesives
Pressure-sensitive solutions designed to grab and hold challenging industrial substrates. Textured, powder-coated and low-surface-energy surfaces? No problem.Built for harsh conditions
Materials that resist abrasion, moisture, chemicals, fluids, salt spray, thermal cycling and other demanding conditions.Precision fit
Die-cut and machined components designed to fit cleanly into equipment, housings, panels and assemblies.
Industrial & OEM solutions for the job at hand
Built to match your environment. Designed for heavy use.
Technical & material requirements:
What we work with
The following are some of the materials and manufacturing capabilities we routinely use for industrial applications.
MATERIALS
Graphic overlay materials
Polycarbonate
Polyester
PVC
Acrylic
Pressure-sensitive adhesive materials
3M VHB Tape
3M Thin Bonding Tape
3M Adhesive Transfer Tape
Open- and closed-cell foam
EPDM
Nitrile
Neoprene
Silicone
Polyethylene
PORON®
PVC
Viton
Rigid materials for panels
Aluminum
Acrylic
Polycarbonate
ABS
Engineering plastics
Plastic sheet stock
Electrical insulation and shielding materials
Fishpaper
Formex
G10/FR4
Nomex/Nomex laminations
Polymex®
PRINTING/IDENTIFICATION CAPABILITIES
Identification capabilities
Barcode
Serial number
Variable data printing
Industrial labels
Warning labels
GHS-compliant labels
Automation ready labels
COMPLIANCE
CONSIDERATIONS
Requirements supported
ISO 9001:2015
UL
GHS
CSA
RoHS
Built to support every phase of development
iD Products is set up for the full OEM product lifecycle.
Material review: Technical support backed by partnerships with 3M™
Prototyping: Fast-turn proof-of-concept parts and samples for evaluation.
Design-for-manufacturing input: Expert review to help improve manufacturability, material fit and production efficiency.
Production scale-up: Support from prototype to short runs to repeat production as your program grows.
Supply chain support: Stocking and release programs aligned with your production needs.
Keeping quality consistent and production moving:
How we do it
Here’s how we get it done:
Quality, compliance and supply support are the backbone of your partnership with iD Products.
Continuous improvement: ISO 9001:2015-certified quality management system
Safe, responsible, sustainable: REACH and RoHS compliant
Precise printing: Pantone color matching and spectrophotometer technology
Built-in inspection: Quality checks to verify specifications throughout production
Supplier continuity: Strong supplier relationships, including our 3MTM partnership
Verification: Certificates of Compliance available upon request
FAQs about tamper-evident labels
How can industrial labels withstand UV, chemicals, abrasion and outdoor exposure?
Industrial label materials should be designed for long-term performance under the harshest conditions. Synthetic film and facestock materials like polyester (PET), polypropylene (PP), polyethylene (PE and vinyl (PVC), are designed to maintain print readability and performance. High-tack acrylic adhesives selected for long term hold.
Can you help us test a component before we place a larger production order?
iD Products can support every stage of development for your custom industrial components. To prepare your product for market, we can fast track prototypes for proof-of-concept parts and test samples. Our manufacturing processes are designed to scale with the growth of your product line — from proactive material sourcing to efficient production.
What types of custom OEM components can iD Products manufacture?
iD Products can manufacture multiple components for industrial applications — in some cases, within the same assembly. Our solutions include tight-tolerance die-cut insulators, gaskets and shields, graphic overlays, close-tolerance machined panels and thermal solutions engineered to withstand chemicals, mechanical stress, high heat and other demanding conditions. By consolidating several components under a single vendor, you can simplify your supply chain, saving time and cost.
What information should I provide for a quote for an industrial or OEM component?
The more information you provide upfront, the more accurately we can evaluate your project and prepare a quote. Include CAD files or drawings, preferred materials and acceptable alternatives, application requirements, quantities and your required turnaround time. Also share any specifications that may affect manufacturing, printing, assembly or shipping.
Don’t have every detail worked out? No problem. Our skilled technicians can help with material selection and other design considerations. Reach out to set up a call and discuss your application.
Can you support ANSI / OSHA-style warning labels?
Yes. iD Products can manufacture custom safety and warning labels for industrial equipment and work environments. Provide your required artwork, specifications and applicable ANSI or OSHA requirements, and we can help select label materials, adhesives and printing methods suited to the application.
We can also account for environmental factors such as UV exposure, chemicals, abrasion, moisture and temperature when recommending a label construction. Contact us to discuss your labeling requirements and application conditions.
iD Products: One manufacturing partner, multiple industrial solutions
iD Products is your single-source partner for the finishing components that complete your assembly and perform on the line. Bring us your application. We’ll identify, source and manufacture a solution that brings your product to completion.
Ready for a quote?
For questions on products or custom labels, please contact us.